Samsung WF42H5500A Serie Manual Del Usuario página 22

Deactivating the Child Lock function
Pressand hold both the Soil Level and Spin buttons simultaneouslyfor approximately 6 seconds,
• When you deactivate the Child Lock function, the door is unlocked and the "Child Lock 6" is turned off.
//_o The Child Lock function prevents children or the infirmfrom accidently operatingthe washer and
....... injuring themselves,
If a child entersthe washing machine, the child may become trapped and suffocate,
Once you haveactivated the Child Lock function, it continues working even if the power is turned
off,
Openingthe door by force can result in injury due to damage to the product.
z_To add laundryafter you have activated the Child Lock function, you must first pause or deactivate the
....... Child Lock function.
lf you want to open the door of the washing machinewhen the Child Lock function is activated:
Pause or deactivatethe Child Lock function.
Turnthe washing machineoff and then on again.
Spin Only
If you press the POWER button and then press and hold the Spin button for 3 seconds, the
spin time will be displayed on the display panel.
Then, press the Spin button repeatedly until the required spin level is selected, and then press
the START/PAUSE button.
_ Before pressing the Spin Only button to use the Spin Only function, you can select a cycle
with the Cycle Selector. If you have selected a cycle, you can only select the spin level
corresponding to the selected cycle.
Garment+ _+
You can add or take out laundry items even after the wash has started, as long as the "_++" light
is on. Pushing the START/PAUSE button unlocks the door, unless the water is too hot or if there
is too much water in your washer. If you are able to unlock the door and wish to continue the
wash cycle, close the door, and then press the START/PAUSE button.
Delay End
You can set the washing machineto start your wash automaticallyat a latertime, choosing a delay time.
The hour displayed indicatesthe time at which the wash will be started.
1. Set your wash cycle.
2. Pressthe Belay End button repeatedlyuntil the delay time is set.
3. Pressthe START/PAUSE button, The "Delay EndQ" indicator will be lit, and the clock will begin
counting down until it reachesthe set time,
4. Tocancel a Delay Endfunction, press the POWER button and then turn the washing machineon
again.
Sound
The Sound Off function can be selected during all cycle.