Samsung WF42H5500A Serie Manual Del Usuario página 31

SELF CLEAN+
Self Clean+ is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1. Press the Power button.
2. Press the Self Clean+ button.
• Once the Self Clean+ button is pressed, the
only function that can be set is Delay End.
3. Press the Start/Pause button.
When you press the Start/Pause button, Self
Clean+ begins.
My Cvc_e
Oe_y E_
_×tr'a _/s_ ...................
Self Clean+
xtra Sp_ .....................
sleam
............ , ,<
D
Hot _ HOb _ /-
e warm _ Medium _ No_ma_
_o Warm _ LoW _ v
Co_d _ NO Sp_n _ Ught
Tem_ Spt_ Soi Lye
_ _ warn _ Medium _ Normal Self Clean÷
Extra sp_n _ E_oWarm _ _ow _ _'/ ................ i
No S_m _ U_ht
....... Sup<_rSpeed
Str_arr" lemD Spir Soil LeVel ..... .
" .... ;; [ ...... : :;:i*
CAUTION
%
Using Self Clean+, you can clean the drum, tub and diaphragm without using a cleansing
agent.
Never use Self Clean+ when laundry is in the washing machine. It may cause damage to the
laundry or a problem with the washing machine.
• If you want to use a drum cleansing agent, use only 1/10 of the amount of the drum
cleansing agent recommended by the cleansing agent manufacturer. (When using a
powder-type cleansing agent, remove the liquid detergent compartment.)
The Self Clean+ Auto Indicator Function
If the "Self Clean+" button is lit after a wash, it indicates
that tub (drum) cleaning is required. In this case, remove the
laundry from the washing machine, turn the power on, and
clean the drum by running Self Clean+.
If you do not run Self Clean+ after every 40 washes, the
"Self Clean+" indicator turns off after one hour. However,
the "Self Clean+" indicator will light again after five
washes. Not running Self Clean+ at this point will not cause
a problem with the washing machine.
Although the Self Clean+ Auto Indicator appears once a
month or so, the frequency may differ depending on the
number of times the washing machine is used.