Lomography DIANA BABY 110 Manual página 7

SHOOTING WITH THE DIANA BABY 110
Installing the Film Transportation Back:
In order to take photos, the Film Transportation Back must be attached.
1. Detach the Storage Back by sliding the Back Lock at the bottom. You can now
remove the back.
2. Install the Film Transportation Back by sliding it in from the back side of the cam-
era. Make sure it locks into place.
INSTALLING A 110 FILM CARTRIDGE
1. Flip the Transparent Pressure Plate clockwise until you see the fully-open film
chamber.
2. Install the 110 film cartridge by sliding it in horizontally.
3. Flip back the Transparent Pressure Plate and lock it into place.
4. Turn the Film Advancing Wheel until it stops. You are now reaching the first frame
of film and are ready to shoot!
7