Segway P100SE Manual Del Producto página 3

EN
Handlebar Functions
USB Port
Name Function Operation method
Press the Power Button to power on the scooter. Press and hold to power it off.
Power on/off
* Available only when the scooter is not in Anti-theft mode.
Power Button
Wake up the dashboard Press the Power Button to wake up the dashboard when the dashboard automatically dims.
Mode Switching
Switch between speed modes Press the Mode Switching Button twice to switch mode.
Button
Enabling ASSIST mode via the Segway-Ninebot app:
When the scooter is at a complete stop, press the Multi-function Button to turn on
ASSIST mode.
Turn on/off ASSIST mode
Turn off ASSIST mode: Release the throttle and squeeze brake levers to stop, then
press the Multi-function Button again.
Turn on/off the headlight Rotate the Multi-function Button clockwise/counterclockwise to turn off/on the headlight.
Multi-function
Button Rotate the Multi-function Button clockwise/counterclockwise and hold it for 3 seconds to
Turn on/off the adaptive
turn off/on the adaptive headlight feature.
headlight feature
* When the scooter is activated, this feature is turned on by default.
Press the Multi-function Button to confirm the password after entering the password
Confirm the password
with the Direction Indicator Button successively.
USB Port Charging Connect your device to the USB Port for charging.
Throttle
Speed up Press and hold the throttle to speed up.
Interact with the NFC card to
Tap the NFC card on the NFC Area to power on/off the scooter.
power on/off
NFC Area
Interact with the NFC card to
Tap the NFC card on the NFC Area to unlock the scooter.
unlock
Horn Button Turn on the horn Press the Horn Button, the scooter will beep.
Turn on the left/right direction Press the left/right side of the Direction Indicator Button, the left/right direction indicator
indicator will flash, and automatically turns off after 5 seconds.
Direction
Indicator Button
Press the left/right side of the Direction Indicator Button (left is minus, right is plus) to enter the
Enter the password
password.
02
Dashboard
Power Button
USB Port Icon
Mode Switching Button
Speedometer
Temperature Warning
Throttle
NFC Area
Headlight (on)
Horn Button
Headlight (off)
Multi-function Button
ASSIST Mode
Direction Indicator Button
Lock
Adaptive Headlight
Direction Indicator
Symbol Name Meaning Description
POWER Progress Bar The symbol displays the motor output power of the scooter.
Speedometer
The symbol displays the current speed of the scooter.
When the scooter is powered off after 30 seconds:
When the icon
If the scooter is moved or touched by someone, it will enter to Anti-theft mode. At
flashes, it means
this point, the scooter will start beeping and the front and rear direction indicators
the scooter enters
will flash, and the motor will be locked automatically.
Anti-theft mode.
Note: Only available to power on the scooter with NFC card.
When locked via the Segway-Ninebot app or in the unlocking state via
password, the scooter will keep beeping and the tail light will flash.
Lock
Unlock the scooter with the following methods:
1) Press the Power Button to wake up the dashboard, the dashboard will
When the icon lights
up, it means the display the digit "0" by default, then enter the four-digit password 1-2-3-4 with
scooter is locked. the Direction Indicator Button and confirm the password with the
Multi-function Button successively.
Note: After activating your scooter, enable/disable the unlock with a
password feature via the Segway-Ninebot app and set your password.
Otherwise, you cannot unlock your scooter with a password.
2) Tap the NFC card on the NFC Area.
3) Unlock via the Segway-Ninebot app.
Temperature Warning It indicates that the battery temperature has reached 60°C (140°F) or is below 0°C (32°F).
EN
POWER Progress Bar
Walk Mode
ECO Mode
DRIVE Mode
SPORT Mode
Bluetooth
Warning
Remaining Battery Power
Direction Indicator
NFC Area
03