5
Maintenance
5.1 Grease Filters
5.1.1Cleaning Metal Self- Supporting
Grease Filters
• The filters must be cleaned every 2 months of
operation, or more frequently for particularly
heavy usage, and can be washed in a dishwash-
er.
• Remove the filters one at a time by pushing them
towards the back of the group and pulling down
at the same time.
• Wash the filters, taking care not to bend them.
Allow them to dry before refitting.
• When refitting the filters, make sure that the
handle is visible on the outside.
Hood / User Manual
5.2 Activated charcoal filter
(Recirculation version)
These filters are not washable and cannot be re-
generated, and must be replaced approximately
every 4 months of operation, or more frequently
with heavy usage.
5.2.1 Replacing The Activated
Charcoal Filter
• Remove the metal grease filters
• Remove the saturated activated charcoal filter as
shown (A).
• Fit the new filters (B).
• Replace the metal grease filters.
5.3 Lighting unit
Warning: This appliance is fitted
with a white LED lamp classed as
1M according to EN 60825-1: 1994
A
+ A1:2002 + A2:2001 standards;
maximum optical power emitted
@439nm: 7µW. Do not look directly at
the light through optical devices (bin-
oculars, magnifying glasses...).
• For replacement contact technical support.
("To purchase contact technical support")
11 / 111 EN