Publicidad
Idiomas disponibles
Idiomas disponibles
Powering ON/OFF:
The instrument can be used in either a Self-Leveling Mode (for level applications) or
Pendulum-Locked Mode (for inclined applications).
Powering ON/OFF in the Self-Leveling Mode:
In this mode, the laser beam self-levels within ± 4° to project horizontal and vertical laser lines.
1. Before powering ON, place the instrument on a firm and level surface.
2. Slide the Pendulum Switch
2
to the UNLOCK position to activate the laser
and wait until it stabilises.
NOTE: If the instrument is tilted beyond its self-leveling limits (± 4°), the Pendulum
Locked indicator
4
will flash and the laser beam will rapidly flash.
Reposition the instrument until the beam stabilises and the indicator stops flashing.
3. To power OFF, slide the Pendulum Switch
5
ON/OFF button
.
2
to the LOCK position and press the Power
14
Powering ON/OFF in the Pendulum-Locked Mode:
In this mode, the self-leveling capability is disabled, and the laser level can be tilted
to project horizontal and vertical laser lines at an incline.
1. Press the Power ON/OFF button
5
2. Pendulum Locked Indicator
4
will flash and the laser beam will slowly flash
(approx. every 6 seconds).
3. To power OFF, press the Power ON/OFF Button
for three seconds to activate the laser.
5
.
15
Publicidad
