Alpina 871125224774 Manual De Instrucciones página 6

WARNING! This heater is not equipped with a device for controlling
the temperature of the room. Do not use this heater in small rooms
when they are occupied by persons not capable of leaving the room
on their own, unless constant supervision is provided.
Note: Please ensure that the power plug is still accessible after
installation of the electric heater.
Note: Ensure that the electric heater is correctly installed. If in doubt,
contact a professional.
Your electric heater is now ready for operation.
Operation
The voltage of the power source must comply with the specifications
on the ratings plate of the heater. Devices marked with 230 V can also
be operated at 220 V. Before using the appliance, it is imperative to
ensure that the installation location corresponds to the requirements of
the safety instructions.
Note: When the heater is turned on for the first time, a harmless
slight odour may occur. This odour is produced by the internal heating
elements as they heat up. Provide suffcient ventilation.
Note: Your heater is fitted with a safety device that will switch the
appliance off overheating occurs. lf the heater stops working, turn it
off and inspect the inlets and outlets tor blockages. Unplug the heater
and wait at least 10 minutes for the protection system to reset before
attempting to restart the appliance. lf the safety device still switches
the heater off and prevents it from operating, take the heater to your
nearest service centre for inspection and repair.
Attention:
1) Check that the air intake and exhaust is not covered or obstructed
in anyway.
2) Keep combustible objects at least 1 m away from the unit.
Note:
1) This unit comes standard with a 6ft (1.4m) long cord. Always plug
the unit into an wall outlet. An extension or relocate tab should never
be used.