Descargar Imprimir esta página

FLYLINKTECH CF500 Manual Del Usuario página 8

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 57
It is also a power bank
DC Output: 12-16v/8A, 110W max. Powers for small electrical appliances, for example
car refrigerator, Car air pump, Car cleaners, laptop, small fan etc.
USB Output1: (QC 3.0) 5V/3A, 9V/2A, 12V/1.5A. charge for telephone, camera, tablet etc.
USB Output2: 5V/2.4A,charge for telephone, camera, tablet etc.
Wireless Charger:10W
Start the Vehicle
To jump start the vehicle battery, put the vehicle in park (neutral if the vehicle has a manual transmission) and
engage the emergency brake. Locate the battery for the vehicle and follow the steps listed below.
Jumper cables are color coded, RED for POSITIVE (+) and BLACK for NEGATIVE (-). DO NOT mix up the cables or
allow the metal ends to touch together because this may damage the battery, charging system and/or electronics on
a vehicle.
Step 1
: Insert the plug of the smart battery clamp completely into the jump starter. If the green and red light
indicators on the battery clamp are flashing alternately, you are safe to move on to the next step.
Note:
This product is for 12V car(Up to 8.0L Gas Or 6.0L Diesel Engine) only. Please make sure that 3 to 4 indicator
lights are illuminated (battery level is above 50%) before you use it to jump start your car.
EN
06

Publicidad

loading

Productos relacionados para FLYLINKTECH CF500