Publicidad
Idiomas disponibles
Idiomas disponibles
Step 2:
Connect the red clamp to the positive terminal(+) of the car battery and connect the
black clamp to the negative terminal (-) of the car battery. If the green and red light indicators
on the battery clamp are flashing alternately, you are safe to move on to the next step.
However, if the red indicator light is on:
1 .The battery clamp may be connected in reverse. If so, you need to disconnect the battery
clamp from the vehicle and the jump starter.
2.Adjust the clamps for maximum contact with the battery terminals
Step 3-a
: Start your car.
If you failed to start your car, you need to disconnect the battery clamp from the vehicle and
the jump starter. Wait for at least 30 seconds, then try again.If you failed to start your car after
2 attempts, you can use the force start function. See step 3-b.
Step 3-b(optional)
: Force start function. First please make sure that the clamps are
connected to the correct polarity battery terminal. Then, press and hold the force start
button for 3 seconds. When the indicator light of the smart clamp is solid green, you need
to start the vehicle within 30s.
Step 4:
Once your car is started, remove the battery clamp from the car-battery and the
jump starter within 30 seconds.
EN
07
Publicidad
