Publicidad
Idiomas disponibles
Idiomas disponibles
CHECK TiRE PRESSURE
The tires on your tractor were over-inflated
at the factory for shipping purposes. Correct
tire pressure is important for best cutting
performance.
• Reduce tire pressureto PSI shown on tires.
CHECK
DECK
LEVELNESS
For
best
cutting
results,
mower
housing
should be properly leveled.
See "TO LEVEL
MOWER"
in the Service
and Adjustments
section
of this manual.
CHECK
FOR PROPER
POSITION
OF
ALL
BELTS
See the figures that are shown for replacing
motion and mower blade drive belts in the
Service and Adjustments section of this man-
ual. Verify that the belts are routed correctly.
CHECK
BRAKE
SYSTEM
After you learn how to operate your tractor,
check to see that the brake is operating prop-
erly, See "TO CHECK BRAKE" in the Service
and Adjustments
section of this manual
_f'CHECKLiST
Before you operate your new tractor, we
wish to assure that you receive the best
performance and satisfaction
from this
Quality Product,
Please
review the following
checklist:
t/f All assembly
instructions
have
been
completed.
_" No remaining
loose parts in carton_
v/
Battery
is
properly
prepared
and
charged°
J
Seat is adjusted
comfortably
and tight-
ened securely_
_' All tires are properly
inflated.
(For ship-
ping purposes,
the tires were overinflated
at the factory).
t_ Be sure mower deck is properly
leveled
side-to-side/front-to-rear
for best cutting
results.
(Tires must be properly
inflated
for leveling).
_" Check
mower and drive belts.
Be sure
they are routed properly
around
pulleys
and inside all belt keepers.
#f Check
wiring.
See that all connections
are still secure
and wires
are properly
clamped.
J" Before driving tractor, be sure freewheel
control
is in "transmission
engaged"
position
(see "TO TRANSPORT'
in the
Operation
section
of this manual).
While learning howto use your tractor, pay ex-
tra attention
to the fo!lowing
important items:
_" Engine oil is at proper level°
v/' Fueltank
is filled with fresh, clean, regular
unleaded
gasoline,
V" Become
familiar
with all controls,
their
location
and function.
Operate
them
before you start the engine.
Be sure brake system is in safe operating
condition.
tf
Be sure Operator
Presence
System and
Reverse
Operation
System
(ROS)
are
working properly
(See the Operation
and
Maintenance
sections
in this manual)°
V _ It is important to purge the transmission
before operating
your tractor for the first
time. Follow proper starting and transmis.
sion purging instructions
(See 'TO START
ENGINE" and "PURGE TRANSMISSION"
in the Operation section of this manual).
12
Publicidad
