Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Complete cleaning mode:
-
Select this mode to perform a deep cleaning of your house. The robot vacuum cleaner will
clean in Edge mode and continue zigzagging horizontally and vertically. It will then return
to the charging base.
-
To activate this mode, select the complete cleaning option on the app.
Power Level function:
Select the power level on the app to control the robot vacuum cleaner's suction power during
cleaning. There are four suction power levels: 3: Off, Eco, Normal and Turbo.
Cleaning scheduling:
-
To make cleaning easier, the robot vacuum cleaner has a function that allows it to be
programmed daily from the app. According to the setting, the robot vacuum cleaner will
automatically start cleaning in the selected days at the desired time.
-
Before adjusting the time and settings, make sure the robot vacuum cleaner is switched
on.
-
In addition, you can select different predefined cleaning programmes for different
situations in your daily life.
Other Functions;
Night Function:
A Do Not Disturb time slot can be selected to control the operation of the robot vacuum cleaner,
and it can be modified or cancelled from the app. During the set time, the robot vacuum cleaner
will disable the automatic, continuous cleaning and timer functions.
Map Editing function:
This function allows you to edit the generated maps: rename cleaning areas, split or combine
areas, and edit cleaning mode, mark restricted areas and select different suction powers.
Robot vacuum cleaner's Location function:
Allows to locate the robot vacuum cleaner on the map.
4. CLEANING AND MAINTENANCE
Cleaning the main brush. Fig. 9
-
The main brush spins at top speed and helps pushing the dirt into the suction mouth.
This brush is in contact with the floor, and therefore with dirt, so it can wear out overtime,
affecting negatively to the cleaning efficiency. For this reason, it is suggested to replace the
main brush after a maximum of 320 hours or less.
1.
Slightly press the main brush frame's tabs to open the main brush compartment and
remove it.
58
CONGA 11090 SPIN REVOLUTION HOME&WASH
2.
Remove hair, lint, and other dirt trapped in the brush and around the shafts with the help
of the self-cleaning brush.
3.
Clear and clean the robot vacuum cleaner's suction channel.
4.
Reinstall the main brush and its frame.
Recommendation
It is recommended to clean the main brush once a week with the help of the self-cleaning
brush.
Side brush. Fig. 10
The side brush is designed with many bristles and used both to push dirt into the suction
mouth and thoroughly clean edges and corners. This brush may wear out overtime, which will
negatively affect cleaning efficiency.
Recommendations
-
It is recommended to clean the side brush once a week with the help of the self-cleaning
brush.
-
Remove the retaining screw of the side brush with a screwdriver and clean the brush
regularly.
-
After cleaning, reinstall the side brush using the screwdriver.
Recommendation
To ensure perfect cleaning, it is recommended to change the side brush every 3 months
(depending on frequency and type of use).
Dust tank. Fig. 11.
-
Lift the top lid of your robot.
-
Press the tank removal button and remove the tank.
-
Use the self-cleaning brush to clean the inside of the mixed tank.
-
You can clean the dust compartment with water, without immersing the tank.
-
Reinstall the dusk tank on the robot vacuum cleaner.
Filters
High-efficiency filter
-
The high-efficiency filter is designed with fibres that help trap dust particles, dust mites,
pollen... It is very important to periodically clean the filter, to prevent these particles
from building up in the filter, causing efficiency loss. It is convenient to carry out this
maintenance once a week.
-
Replace the high efficiency filter every 3 months, depending on the frequency and type of
use.
ENGLISH
CONGA 11090 SPIN REVOLUTION HOME&WASH
59
Publicidad
