Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATIONS
Be careful when working on hot engines because of the risk of burn injuries!.
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage and personal injuries.
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
Do not use locking tools for camshaft and crankshaft as a counter-holder, during loosening or
tightening screws on pulley, camshaft or crankshaft. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information.
USE
Locking tool for crankshaft pulley
to be used as OEM 303-1630
Locking tool for camshaft
to be used as OEM 303-1625
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Adjustment tool for camshaft
to be used as OEM 303-1631
Removing tool for injection pump
to be used as OEM 303-1627
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
