Holex 08 1437 Manual De Instrucciones página 8

HOLEX LED torch
de
1. Twist the battery cover anti-clockwise to unscrew it.
2. Remove the battery compartment.
en
3. Remove the used batteries.
▶ Always remove and replace all of the batteries.
bg
4. Insert three AAA/LR03 batteries into the battery compartment, paying attention to
the polarity of the batteries.
zh
5. Insert the battery compartment into the torch, paying attention to the direction of
the arrows.
da
6. Replace the battery cover and screw it clockwise to close it.
▶ The torch is now ready to use.
fi
6. Operation
fr
LED risk group 2 - IEC 62471
it
WARNING
Risk of blinding and injury to the retina
hr
▶ Never look directly into the light beam.
▶ Do not direct light beam at animals' or people's eyes.
lt
▶ In the event of commercial use, the user must be instructed according to the acci-
dent prevention regulations.
nl
6.1. ILLUMINATION LEVELS OF THE TORCH
no
The torch has two different illumination levels.
 Level 1: illumination up to 250 lm
pl
 Level 2: illumination up to 100 lm
6.2. TURNING THE SPOTLIGHT ON AND OFF
pt
1. Press the on/off button in order to switch on the spotlight.
▶ Level 1 is active.
ro
2. Press the on/off button in order to reduce the light intensity of the spotlight.
▶ Level 2 is active.
sv
3. Press the on/off button in order to switch off the spotlight.
sk
6.3. ADJUSTING THE FOCUS
1. Hold the middle of the torch in one hand.
sl
2. Using the other hand, slide the torch head backwards or forwards.
▶ Adjust the focus continuously.
es
7. Storage
cs Remove batteries from the lamp before storing.
hu
8