Publicidad
Idiomas disponibles
Idiomas disponibles
TIME/TEMP
The preset functions are set to default time and temperature according to the function
guide. Depending on the preset, time and temperature can be adjusted by pressing the
"Time/Temp" button.
To adjust the temperature, press "Time/Temp". The temperature will flash indicating that its
time to adjust the temperature. Press "+" to increase or "-" to decrease the temperature.
To adjust the time, press "Time/Temp". The time will flash indicating that its time to adjust
the time. Press "+" to increase or "-" to decrease the time.
MENU
While in standby, press "Menu" to select the desired function (Griddle, Grill, Rice, Roast,
Saute, Slow Cook L/M/H, Steam, Stew, Warm). The selected preset function will flash and
preset default time will appear on the screen. Remember to adjust time and temperature
based on cooking needs. Once cooking is completed, "End" will appear on the screen.
Press
to turn off the heating base.
PRESET FUNCTION INSTRUCTION
1. GRIDDLE/ GRILL FUNCTION
1. Place the grill or griddle pan on the heating base.
2. Press
to power on. Then press "Menu" to select "Griddle"/ "Grill" function. The LED
light will flash. The default temperature is 400 °F and default time is 30 mins.
3. To adjust the temperature, press "Time/Temp". The temperature will flash indicating
that its time to adjust the temperature. Press "+" to increase or "-" to decrease the
temperature. The temperature range is from 200 °F-400 °F.
4. To adjust the time, press "Time/Temp". The time will flash indicating that its time to adjust
the time. Press "+" to increase or "-" to decrease the time. The time range from 1 min to 1
hour.
5. Press the "Start/ Pause" button to start. The LED light will show solid. "PrE-HEAt" and
temperature will toggle under this function. Once preheating is completed, the unit will
beep 3 times and the time / temperature will display, indicating that the preheat cycle
has ended.
6. During cooking, the time and temperature can be adjusted at any time by pressing "Time/
Temp". Once cooking is complete, "End" will display on the screen and beep 5 times.
2. RICE FUNCTION
1. Measure uncooked rice for the desired amount with a measuring cup.
Note: One cup of uncooked rice will make approximately 2 cups of cooked rice.
2. Using a measuring cup, add 1-1/2 cups of water for each cup of raw rice to be cooked. For
example, to cook 4 cups of raw rice add 6 cups of water. Note that texture and result will
vary based on the type of rice and water ratio.
3. For different types of grains, follow the packaging instruction for correct water ratio.
4. Press
to turn the heating base on. Then press "Menu" to select the "Rice" function. The
LED light will flash and show a chasing pattern. The default time is 30 mins. The time and
temperature are not adjustable.
English - 6
Publicidad
