IKRA KES 1800-35 Instrucciones De Manejo página 26

Repair Service
Repairs to electric power tools should only be carried out
by specialist electrical personnel.
Waste disposal and environmental protection
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose
of the device together with your domestic refuse, but dis-
pose of it in an environmentally friendly manner. Please
dispose of the device itself at an according collecting/
recycling point. By doing so, plastic and metal parts can
be separated and recycled. Information concerning the
disposal of materials and devices are available from your
local administration.
Spare parts
Chain 35cm
Chain 40cm
Warranty
For this tool, the company provides the end user - inde-
pendently from the retailer's obligations resulting from
the purchasing contract - with the following warranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by
the original purchasing document. For commercial use
and use for rent, the warranty period is reduced to 12
months. Wearing parts, rechargeable batteries and de-
fects caused by the use of non fitting accessories, repair
with parts that are not original parts of the manufacturer,
use of force, strokes and breaking as well as mischievous
overloading of the motor are excluded from this warranty.
Warranty replacement does only include defective parts,
not complete devices. Warranty repair shall exclusively
be carried out by authorized service partners or by the
company's customer service. In the case of any interven-
tion of not authorized personnel, the warranty will be
held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.
# 27111011
# 27110996
EC Declaration of Conformity
We, ikra GmbH, Schlesierstraße 36, D-64839 Münster,
declare under our sole responsibility that the product
Electric Chainsaw KES 1800-35, KES 1800-40 to which
this declaration relates correspond to the relevant basic
safety and health requirements of Directives 2006/42/EC
(Machinery Directive), 2004/108/EC (EMC-Guideline)
2011/65/EU (RoHS-Guideline) and 2000/14/EC (noise
directive) incl. modifications. For the relevant implemen-
tation of the safety and health requirements mentioned in
the Directives, the following standards and/or technical
specification(s) have been respected:
2006/42/EG Annex I
EN 60745-1:2009+A11; EN 60745-2-13:2009+A1
ZEK 01.4-08/11.11
EN 55014-1:2006+A1+A2; EN 55014-2:1997+A1+A2
EN 61000-3-2:2006+A1+A2; EN 61000-3-11:2000
Engineering type licence No.:
BM 50254513 0001; BM 50254513 0002
TÜV Rheinland LGA Products GmbH (0197)
measured acoustic capacity level L
1800W/35cm: 102,42 dB(A)
1800W/40cm: 103,55 dB(A)
guaranteed acoustic capacity level L
108.0 dB (A)
Conformity assessment method to annexe V / Directive
2000/14/EC
The year of manufacture is printed on the nameplate and can be additionally
retrieved via the consecutive serial number.
Münster, 07.10.2014
Gerhard Knorr, Technical Management Ikra GmbH
Maintenance of technical documentation: Gerhard Knorr, Kärcherstraße
57, DE-64839 Münster
GB-9
WA
WA