Publicidad
Idiomas disponibles
Idiomas disponibles
4.2 Controlelements
4.3 Assembling
12
1.
Place the motor unit (6) on a fl at surface.
2.
Check that the silicone plug (12) is placed in the pulp outlet (4) (see the underside
of the juicing container (3)).
3.
Place the juicing container (3) on the motor unit (6), ensuring that the pulp outlet
and juice outlet are both located in the openings.
4.
Place the juicing auger in the juicing container, press it down and rotate until it
clicks into place.
5.
Place the feeding tube on the appliance. The arrow
the
symbol on the juicing container.
6.
Turn the feeding tube until the arrow
open so that the feeding tube can click into place correctly.
7.
Place the pulp container under the pulp outlet and the juice container under the
juice outlet.
4.4 Rating plate
The rating plate with the connection and performance data can be founded beneath the
device.
ON = Juicing auger will start and push food down.
0 = Stops operation.
R = Pushes food back up.
points to the
on the front should point to
symbol. The lid must be
CASO SJW 600 XL
DE
EN
FR
IT
ES
NL
RU
SV
27
Publicidad
