Steelcase Migration LTD Instrucciones De Uso página 36

6 Errors and faults
Desk only moves
slowly
Table only
moves briefly on
one side and
then stops
6.3.2 Table of control panel error messages - Click
codes of the controller
Number of clicks -
clacks
1x
1x
EN
7x
2x
4x
7x
36
Max. lifting force
exceeded
Loose or no connection
to the drives/side parts
Drive defective
When
for mains on
Up button pressed
During movement,
the connection to a
drive is lost
Limit height adjusta-
bility - set
Limit height adjusta-
bility - delete
Table moves
crookedly
Reduce weight
Check or establish plug-in
connections of the motor
cables to the controller and to
the drives
Contact customer service
Status information
Normal operation: The
system operates without a
problem.
Reset: Initialisation run
required.
Error:Desk can no longer
be moved.
Confirmation of successful
saving of the end position.
(only with the simple
Up/down control panel
without display)
Confirmation of successful
deletion of the end position.
(only with the simple
Up/down control panel
without display)
Error: The drives do not
have the same height; ini-
tialisation run required.