Beurer ML 10 Manual De Instrucciones página 11

7. Connect the Lamp to a Network
1. Power on the lamp and ensure your mobile device's Wi-Fi
is turned on and connected to your Wi-Fi network.
NOTE: Only 2.4 GHz (b/g/n) networks are compatible;
5 GH networks are not compatible.
2. Tap the "+" symbol on the
top right of your device's
screen and select "Light-
ing devices" from the list.
3. Activate Wi-Fi configura-
tion mode on the lamp by pressing and
holding the Wi-Fi Button for five sec-
onds; the Wi-Fi Indicator will flash rap-
idly, indicating the lamp is ready to
configure.
11