Mac Mah MOVING-FX BAR Manual De Instrucciones página 25

 Emission control: the control panel should be placed outside locations
exposed to dangerous emissions. Class 3 and 4 lasers must be controlled
by a control key, removed when not in use and held by a qualified
person.
Warning:
 This equipment may only be used for professional entertainment and
display purposes.
 When in use, this equipment must be installed in such a way that the
rays remain above the level of the public's eyes and do not reach them
under any circumstances.
 It is forbidden to use this appliance for any purpose other than that
for which it is intended.
 The manufacturer and distributor are not responsible for damage
caused by Mac Mah LASERs. The user is responsible for using and
complying with NF EN 60825-1:2014 regulations.
2-Presentation of the MOVING-FX BAR :
Rear :
Front :
25