Mac Mah MOVING-FX BAR Manual De Instrucciones página 26

Buttons :
1. Microphone for music detection
2. FUNCTION SCREEN (see point 4 below)
3. Laser safety key. To switch the laser on and off
4. Safety ring. To secure the bar when it is suspended
5. 35mm base plate
6. DMX input & output: For connecting the DMX input and output cable (3-pin
XLR type).
7. IN power connector
8. Power connector OUT for connecting another MOVING-FX BAR
9. Infrared sensor for receiving the remote control signal
3- Technical specifications

6-effects all-in-one bar

2 Derby effects with 4 x 3W RGBWAP LEDs

2 LED PAR effects with 3 x 8W 4-in-1 RGB-UV LEDs

UV light

2 x 30W LED lights

7 gobos and 7 colours

1 red 100mW and green 50mW multipoint LASER on top of the bar

4 x 2W white LEDs for the Strobe effect

Bag for transporting the stand + rigid bag for lighting effects

DMX control, numerous automatic modes, music mode and wireless
remote control

Bar width: 1m

Indoor use
26