Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE CONTROL
1.- STANDBY : on/off.
2.- PVR - REC : begins recording the channel that is being
watched instantaneously. If you press this button a second
time, you can choose the time (hours : minutes) that you want
the recording to automatically stop, after setting this time
press the OK button to confirm. During recording, a red circle
will be shown in the upper right corner, you can press the
PVR-REC button again to check the recording status. Press
the 3 button to end the recording.
3.- EPG: displays the channel programming guide.
4.- INFO: displays the current channel information.
5.- AUDIO: allows you to select the audio language or the audio
balance (mono, stereo, left or right).
6.- TIMER: direct access to the list of events that are
programmed to be recorded. For more information, go to the
PROGRAMMING EVENTS section.
7.- MENU: displays the main menu on the screen.
8.- VOL+/VOL- (a/d): volume adjustment and navigation buttons
for the menus.
9.- FAV: display favorite channel lists.
10.- 0-9: number buttons.
11.- 5/6: allows you to go back or skip ahead of the current
reproduction.
12.- 1: starts the image reproduction.
13.- 2: pauses the image reproduction.
14.- Color buttons for teletext and menus.
15.- MUTE: activates/ deactivates the audio output.
16.- PVR - LIST: shows the list of files recorded on the USB via
the DVB receiver.
17.- TTX: displays the teletext on the screen.
18.- SUBTITLE: enables/disables the subtitles allowing for the
selection of available channels.
19.- EXIT: allows you to exit the menu.
20.- CH+/CH- (w/s): these buttons allow you to change channels
and navigate through menus.
21.- OK : in the menu, confirm the selected option.
22.- TV/RADIO: select among the available TV channels or the radio stations.
23.- RECALL: button to go back to the previous channel.
24.- GOTO: allows you to go to an exact point in the playback. Use the number buttons to enter the exact
time.
25.- 7/8: preview or next buttons.
26.- AD: activates/deactivates the audio description function.
27.- 3: stops the current recording or playback.
- 3 -
EN
Publicidad
