Publicidad
Idiomas disponibles
Idiomas disponibles
EN
CONNECTION
Before making any connections, turn off all equipment and disconnect it from the power supply. It is
recommended that you read the entire manual before connecting the equipment.
Observe the colour coding of the connectors when making audio and video connections. Connect the
DVB-T receiver to the TV set using only one connection type (HDMI or SCART). The general connection
procedure is as follows:
- Connect the antenna to the ANT IN tuner input.
- Connect the audio and video output signal to the TV, via the SCART output or via the HDMI output,
with the appropriate cable in each instance.
- Once the connections have been made in accordance with your needs, connect the devices to the
mains and switch them on.
INSTRUCTIONS FOR USE
INSTALLATION (FIRST USE)
If you are using the tuner for the first time or have restored it to its factory settings, the following menu will
be displayed. Select the language and region in which it is to be installed and start scanning for channels.
MENU
Press the MENU button to access the main menu. Use the w/s buttons to navigate among the menu options
and the a/d buttons to change them.
To go back to the previous menu from a sub-menu, press the MENU button; and to exit, press the EXIT
button.
CHANNEL LIST MENU
Set up parental control and make changes to TV and radio channel lists in order to customize them (delete,
rename and move channels, add channels to favorite lists, etc.).
- 4 -
Publicidad
