FONESTAR RDT-761HD Manual De Usuario página 9

RECEIVER INFORMATION
Select the INFORMATION option to display the system information, version, software, etc.
RESTORE FACTORY SETTINGS
Select the FACTORY SETTINGS option in the menu and enter the password.
NOTE: the default password will be 0000.
SCHEDULE EVENTS (PROGRAM RECORDING AND CHANNEL CHANGES)
Select the TIMER SETTINGS option in the menu. The screen will show a list of events. Select an item from
the list and press OK to configure the event.
A pop-up screen will then request the following parameters:
- TV/RADIO: type of channel to record/view.
- REPEAT: if the event will be a single occurrence or if it will be repeated.
- NO: the DVB receiver will start recording the channel that was selected before accessing the
menu.
- ONCE: only once at the programmed time and day.
- DAILY: every day at the programmed time starting from the day it was programmed.
- WEEKLY: every 7 days at the programmed time starting from the day it was programmed.
- CHANNEL: channel to be recorded.
- WAKEUP DATE: day of recording.
- START TIME: recording start time.
- END TIME: end time of the recordingn.
- MODE: function to be performed.
- RECORD: at the programmed date and time the recording of the indicated channel will start
and will continue for the established time.
- VIEW: at the programmed time and date the indicated channel will be tunedo.
NOTA: it is necessary that a USB device with adequate memory be connected for the intended recording.
- 9 -
EN