Foxsur FBC1207E Manual De Usuario página 4

IMPORTANT SAFETY INSTRUCTIONS
Please read this manual and follow the instructions carefully before using
the charger.
WARNING：
。The FBC1207E charger is designed to charge 12V lead-acid batteries from 4AH -
140AH.
。Check battery manufacturer specifications before using this charger.
。Explosive gases may escape from the battery during charging. Provide ventilation
to prevent flames and sparks.
。 Do not expose charger to sunlight, high temperature environment.
。 Battery acid is corrosive. Rinse immediately with water if acid comes into contact
with skin or eyes.
。 Do not charge a frozen or damaged battery.
。 Do not charge non-rechargeable batteries.
。 Do not place the charger on the battery while charging.
。 Be extra cautious to reduce risk of dropping a metal tool onto battery. It might
spark or short-circuit battery or other electrical part that may cause explosion.
。When working with a lead-acid battery, remove personal metal items such as
rings, bracelets, necklaces, watch...
。Do not smoke or allow a spark or flame while charging.
。In order to reduce risk of electric shock, unplug charger from AC
outlet before doing any maintenance or cleaning.
。Not for use by children or by anyone who is unable to follow
instructions of this manual, unless they are supervised by an adult to ensure the
proper use of charger.
Pulse Repair Battery Charger with LED display
This battery charger utilizes the latest technology in Lead-Acid, LiFePo4, AGM,GEL,
Flooded(Wet), Calcium type deep cycle, VRLA maintenance free lead acid batteries
charging
BEGIN CHARGING:
1.) Verify the voltage and chemistry of the battery.
2.) Confirm that you have connected the AC power plug is plugged into an electrical
outlet.
3.) Confirm that you have connected the battery clamps or eyelet terminal
connectors properly
4.) Press the mode button to toggle to the appropriate charge mode.
5.) The mode LED will illuminate the selected charge mode and the Charge lamp
will illuminate (depending on the health of the battery) indicating the charging
process has started.
6.) The charger can now be left connected to the battery at all times to provide
maintenance charging.
Remark: for 4Ah-10Ah battery, we suggest use "Repair" mode, because the
battery size is too small, use pulse charge is very good for small size battery.
English 2