Foxsur FBC1207E Manual De Usuario página 6

CHARGER MODES:
The FBC1207E has 4 modes: 12V Car, 12V AGM, 12V Motorcycle, REPAIR.
It is important to understand the differences and purpose of each charge mode. Do
not operate the charger until you confirm the appropriate charge mode for your
battery. Below is a brief description:
Frequently Asked Questions:
1.The LED display "FUL", but the battery is yet fully charged.
Reason: As the Battery inside resistance is too large or the capacity of battery is
reduced for Feeder Battery, vulcanized Battery, Low voltage/Long-idle time Battery,
the voltage of battery will immediately soar, causing the "FUL" status occurs when
the battery is yet fully charged.
Solutions: Use "repair" mode , activate the battery.
2. Battery voltage is normal, however the charger does not work:
Reason: There is no AC power input.
Solutions: Check the AC-power source are working or not, change the socket and
re-try it.
CAR Batteries Mode
For GEL, SLA, WET, DEEP CYCLE, EFB, Calcium
AGM & LiFePO4 Batteries Mode
For AGM & LiFePO4 Batteries
Motorcycle Batteries Mode
For Motorcycle Batteries
Repair Mode (16 hours)
An advanced battery recovery mode
for repairing and storing, old, idle,
damaged, stratified or sulfated.
Not all batteries can be recovered, only can use
on Motorcycle and Car batteries
Charge Mode Select Button
Batteries
Max. 7A
Max. 7A
Max. 1.5A
English 4