Publicidad
Idiomas disponibles
Idiomas disponibles
1.
(1)
(2)
Colour Correction Block
The WJ-AVE3 allows for the adjustment of colour from
an input source, as well as compensation for excessive
colour. With the monochrome (MONO) effect, a single
tint can
be cast
over an entire screen
image.
The
following area shows the Colour Correction Block.
COLOUR
CORRECTION
COLOUR
CORRECTION
SATURATION
COLOUR
CORRECTION
tint of the source video image.
~18-
(4)
(5)
Press the HOLD
Button (49), the LED light, to lock the
colour tint selected by the RGB Joystick.
HOLD
=
Press the MONO Button (48), the LED lights. A single
colour can be selected by the RGB Joystick for your
video effect. Placing the Joystick in the center makes
the video Black and White.
Note:
The SATURATION Control (47) has no effect when
the MONO Button (48) is pressed. (LED is lit.)
Back Colour Block
The
Back
Colour
correction
is
used
for
the
Superimpose Effect or the Video Fade. The following
area shows the Back Colour Block.
The colour changes one after another by pressing the
SELECT Button (20) as follows.
WHITE —» YELLOW — CYAN —> GREEN
BLACK «<— BLUE « RED «+ MAGENTA a
Publicidad
