Publicidad
Idiomas disponibles
Idiomas disponibles
Unpacking the Machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the machine and remove the base packaging. Make sure the small triangle foam (a) is
removed with the bottom packaging together. If not, lay the unit down on the side surface
and remove it manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Remove Transport Bolts
WARNING
You must remove the transport bolts from the backside before using the product.
1. Loosen the 4 transport
bolts with a spanner.
WARNING
•
Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
a
There is a risk of suffocation ! Keep all packaging
•
well away from children.
2. Remove the bolts inclu-
ding the rubber parts and
keep them for future use.
12
3. Close the holes using
the cover caps.
V.1
Publicidad
