Midea MLH25N7BWW Manual De Instrucciones página 25

ERROR CODES
Description Reason
E30
Door is not closed
properly
E10
Water injecting problem
while washing
E21
Overtime water draining
E12
Water overflow
EXX
Others
Technical Specifications
Model:MLH25N7BWW
Power Supply
Dimension (W*D*H)
Net Weight
Washing Capacity
Rated Current
Standard Water Pressure
MOVING, STORAGE AND LONG VACATIONS
Ask the service technician to remove water from drain pump and hoses.
Do not store the washer where it will be exposed to the weather. When
moving the washer, the tub should be kept stationary by using the
shipping bolts removed during installation. See Installation Instructions
in this book.
Be sure the water supply is shut off at the faucets. Drain all water from
the hoses if the weather will be below freezing.
Certain internal parts are intentionally not grounded and may present a
risk of electric shock only during servicing. Service Personnel - Do not
contact the following parts while the appliance is energized: Electrical
Valve, Drain Pump, Heater and Motor.
Solution
Restart after the door is
closed.
Check clothes is stuck.
Check if the water pressure
is too low.
Straighten the water hoses.
Check if the inlet valve filter
is blocked.
Check if the drain hose is
blocked, clean drain filter.
Restart the washer.
Please try again first, call
up service line if there are
still troubles.
Parameter
120V~ , 60Hz
595*610*850
72kg (159Ibs)
10.0kg (22Ibs)
11A
0.05MPa~1MPa
25