cecotec DRUMFIT ROWER 9000 REGATTA Manual De Instrucciones página 26

ENGLISH
Display modes
Fig. 11
Name Function
MODE Mode selection button
SET Set the incremental value
RESET Set value to 0 (delete)
Operation
Switch on the LCD display for one second. At the same time, the machine emits a long beep,
the COUNT icon is shown and the display shows 0. Normal mode is activated one second later.
Button functions
MODE
Press the MODE button to enter the setting mode and select the function to be configured.
When pressing it, the corresponding digit of a determined function flashes. If 15 seconds pass
without making any adjustments, the console exits the setting mode automatically.
The switching order of the functions is:
TIME, COUNT, DIST, CALORIES, STROKES/MIN.
Exit the setting mode and go back to normal mode.
SET
- Once you have selected the corresponding function, press the SET button to increase
the setting value. If you continue to press for 2 seconds, it will increase rapidly (1 second
increases by 5 units).
RESET
- When you want to reset the value of a function, press the RESET button.
- If you have not entered the setting mode, the RESET button will not work.
- Press and hold the RESET button for 2 seconds to clear all data; all parameters will go
back to zero. The LCD display will show all the parameters for 1 second. At the same time,
the machine will emit a beep for a long time and then, the COUNT icon and the display will
show "0".
TIMER
- It measures the time elapsed from the start of the movement to the stop of the movement,
it returns to zero after reaching the maximum value. After pressing a button, start the
timer.
- If you do not start moving after 4 seconds, the time stops and "STOP" is shown on the display.
Set the exercise time; the machine will emit a beep when you reach the programmed time.
- The value ranges from 0:00 to 99:00.
50 DRUMFIT ROWER 9000 REGATTA
500 M/MIN
This is a system default setting. It indicates the time required to row a distance of 500 m. The
value ranges from 0:00 to 99:00.
CNT (Counter)
- Measuring range: 0 ~9999, when the maximum value of the range is reached, the counter
returns to zero.
- Setting range: 10 to 9990. Each press on the setting adds 10 units.
DIST
- It measures the distance travelled from the start of the movement to the stop of the
movement.
- Measuring range: 0.0 ~99.9 KM (MI.), when the maximum value of the range is reached, the
counter returns to zero.
CAL
- Measures the number of calories burned from the start of exercise to the end of exercise.
- Measuring range: 0 ~9999, when the maximum value of the range is reached, the counter
returns to zero.
STROKES/MIN
It measures the frequency of rows per minute of movement.
SLEEP
If, after 4 minutes, there is no movement and no heart rate signal input, or if you do not press
any button, the display enters sleep mode. The LCD display switches off after entering sleep
mode.
Switching on the console
The console switches on when you press a button, change the mode, select/change a function,
change/set/reset a value, or start moving.
Beep
When the machine switches on, it emits a beep.
- The machine emits a beep each time you press a button. If you long press a button, the
machine will emit the same beep.
- When the set time, distance and calories go back to zero, the machine will emit four beeps.
If you press a second button before the beep finishes, then the machine stops emitting the
sound. If you press a second button, the machine stops emitting a sound, and the button
function is not operated.
ENGLISH
DRUMFIT ROWER 9000 REGATTA 51