Publicidad
Idiomas disponibles
Idiomas disponibles
3. Place all four frame parts 2x (A) and
2x (B) into the final position on the
floor (Fig. 3).
4. Insert one metal corner (E) into each
end of the horizontal frame (A) (Fig. 4).
5. Slide the vertical frame parts (B) onto the corners (Fig. 5).
6. Slide the lower horizontal frame sec-
tion (A) onto the vertical frame parts
(B) (Fig. 6).
7. Once all frame parts are inserted into each other, each corner is fixed with
4x screws (J) (Fig. 7). When tightening, make sure that the corners are exact-
ly at 90° to each other, Only then should you tighten the screws.
Fig 3
Fig 4
Fig 5
Fig 6
Fig 7
6
Publicidad
