Klarstein MARVEL MIRROR Manual Del Usuario página 21

DISPLAY INDICATIONS
Temperature
Day of the week
OPERATION
To start up the heater, proceed as follows:
• Check the heater to make sure it is not damaged.
• Plug in the heater and turn on the illuminated on/off switch on the side of the
heater.
There are two ways to use the heater:
(1) Switch the device on and off manually
• When the device is turned on, the buzzer will sound once and the device will
be in standby mode.
• Press the power button
light up on the display.
• If the set temperature is higher than the room temperature of 2 °C, the device
will heat up automatically. The symbol
heating indicator also lights up on the heater.
Weekly timer
Power Heating symbol
Hour
on the remote control. The power symbol
lights up in the display and the
Minute
will
EN
21