Klarstein MARVEL MIRROR Manual Del Usuario página 19

INSTALLATION
Installation on the wall
Mark the positions of the four holes
to be drilled on the wall and use a drill
to drill the holes. Make sure that the
distance between each hole matches
the round hole on the wall bracket.
Insert the 4 metal screws for wall
mounting into the plastic dowels.
Slide the screw from position A to
position B by slightly moving the
heater.
Insert the plastic dowels into the
holes.
Lift the heater and align the 4 holes on
the brackets on the back of the heater
with the 4 screws on the wall.
EN
19