Publicidad
Idiomas disponibles
Idiomas disponibles
®
MBX
ULTIMATE ELECTRIC VARIOMATIC
Original instructions
1. Declaration of Conformity
We declare under our sole responsibility the MBX
number *1), comply with all relevant requirements of EU Directives *2) and standards *3)
2. Specified Use
The machines, with original MontiPower
preparation.
The user bears sole responsibility for any damage caused by improper use. Generally accepted
accident prevention regulations and the enclosed safety information must be observed.
3. General Safety Instructions
For your own protection and for the protection of your electrical tool, pay attention to
all parts of the text that are marked with this symbol!
WARNING -
WARNING -
warnings and instructions may result in electric shock, fire and/or serious injury.
Keep all safety instructions and information for future reference. Ensure that these
documents are kept with the electrical tool at all times.
Items referred to in this manual relate to both the MBX
Wheels.
4. Special Safety Instructions
4.1
Safety Warnings Common for the use of Rotary Impact Tool Operations:
a)
This power tool is intended to function as a Rotary Impact Tool. Read all safety
warnings, instructions, illustrations and specifications provided with this power tool.
Failure to follow instructions may result in electric shock, fire and/or serious injury.
b)
Only Rotary Impact Surface Preparation operations shall be performed with this
power tool.
hazard and cause personal injury.
c)
Only use MontiPower
Do not use accessories which are not specifically designed and recommended by
the tool manufacturer. Just because the accessory can be attached to your power
tool does not assure safe operation.
d)
Do not use a damaged MBX
e)
After replacement of the MBX
f)
After fitting accessories such as the Adaptor System and MBX
Allen key / Torx wrench.
to switching on the tool.
Reading the operating instructions will reduce the risk of injury.
Read all safety warnings and instructions. Failure to follow all safety
Operations for which the power tool was not designed may create a
®
®
MBX
Belts and MontiPower
®
Belt or Adaptor System, inspect before use.
Always ensure the Allen key / Torx wrench is removed prior
®
Ultimate
®
accessories, are intended for use in surface
®
®
Belt, check Adapter System for correct assembly.
®
, identified by type and serial
Belts as well as the Vinyl Zapper
®
Adaptor Systems with this tool.
®
Belt, always remove
EN
®
5
Publicidad
