GE AEH18 Serie Manual Del Propietario Y Instrucciones De Instalación página 4

About the controls on the air conditioner--models with touchpads.
Lights next to the touch pads on the air conditioner centre/panel indicate the selected settings,
Light indicatesthe unit
The displayalwaysshowsthe room
is in the
temperature or
temperatureexceptwhen setting the delay time Set m ode
Set temperature °_r th2 Delay_tmqer 1,.____
Lightindicates
Circulaireis on
Decrease
O Mode select
O Fan speed
Decrease
set Increase
and Decrease
Delay timer increase
Circulaire
Auto Fanon/off
Fanspeed Increase
Unit power on/off
Air ConditionerControls
Remote Control
4
Controls
The ah conditioner conuols are located behind die
conuol panel door Press to open and close file do(m
NOTE:The remote
conuol will work wifll file conuol
panel
door open or closed.
O ower Pad
Turns air conditioner on and (fie X&,qlen
turned on, the display will show the room
temperature.
O
Shows die room temperature or time
remaining
on file Delay timer Shows die Set
mmperamre while setting the temperature in
Coolor EnergySavermodes. The Setlight will
mrn on while setting.
NOTE: The display will change [o show the
room temperature after settings have been
made. To recall the Set temperature, press the
Yempincrease A or Decrease V pads.
O emp Increase A/Decrease T Pads
Use to set temperature when in Cool or Energy
Saver mode. The Set light will mrn on while
setting.
O Delay Bmer/ncrease A (+l/Decrease V (-I
Pads
Each touch of the increase A/Decrease Y
pads on the unit or the Increase +/Decrease-
pads on the remora conuol will set the delay
time when
using the Delay 1-24hrfimer
(_).
The Set light will mrn on while setdng.
Fan Speed Pads
Use to set the f_m speed to Low,
Med, High
or AUtOon the unit.
NOTE:
On the remora
conuol, use the f_m speed
Increase +/
Decrease -pads to set the tim speeds to tow,
Med or High. Use the Auto pad to mrn Auto
f_til on.
O ede Pad
Use to set the air conditioner
to Cool, Energy
Saver or Fan Only mode.
0
0
Delay Pads
Delay ON--When the air conditioner is off; it
can be set to automatically
come on in 1 to 24
hours at its previous mode and tim settings.
Delay OFF--When the air conditioner is on,
it can be set to automatically mrn off in 1 to
24 hours.
How to set
Press file Delay 1-24hrpad on die trait or
die @_ pad on file remote conuol. Each touch
of the Increase A/Decrease Y pads on the
unit or the Increase +/Decrease - pads on
the remote control will set the diner in
1-hem intervals. The Set light will mrn on
while setdng.
To review die remaining dine on file Delay
1-24hrdmei; press the Delay 1-24hrpad on file
unit or the _ pad on the remote
control. Use
the Increase A/Decrease Y pads on the unit
or the Increase +/Decrease- pads on the
IeHlo[e conQol [0 set a new Qine
if
desired.
Tocancelthe timer, press dae
Delay
1-24hrpad
until die light on the Delay 1-24hrpad goes off
CIRCULAIREPad
Turn on to provide continuous
side-to-side
air circulation.
For fixed side-to-side air direction, mrn on
until the desired air direction is obtained,
then turn it off