Descargar Imprimir esta página

NODOR NorCook IV N7502 BK Manual De Instrucciones página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

lack of experience and knowled-
ge, if they are supervised and have
received suitable instructions on
safe use of the appliance and un-
derstand the dangers involved.
Children must not play with the
appliance. User maintenance and
cleaning should not be carried out
by children except under constant
supervision.
- Cooking with grease or oil may
be dangerous and cause a fire if
left unattended. NEVER try to ex-
tinguish a fire with water. Rather,
disconnect the appliance and
then cover the flames with a cover
or sheet, for example.
- The cooking process has to be
supervised. A short term cooking
process has
to be supervised continuously.
- Unattended cooking on a hob
with fat or oil can be dangerous
and may result in a fire.
- Fire hazard: do not store ele-
ments on cooking surfaces.
- Only counter top protectors de-
signed for use with the cooking
appliance and listed in the manu-
facturer's instructions should be
used as suitable protection for the
counter top incorporated in the
appliance. Use of unsuitable pro-
tectors may cause accidents.
- When the hob is in use keep all
magnetizable objects away (cre-
dit cards, floppy disks, calculators
and so on).
- After cooking is finished, switch
off using the control provided
(turn down to "0"), and do not rely
on the pan sensor.
- WARNING: Accessible parts will
become hot when in use. To avoid
burns and
scalds children should be kept
away.
Insert in the fixed wiring a mean for
disconnection from the supply mains
having a contact separation in all poles
that provide full disconnection under
overvoltage category III conditions, in
accordance with the wiring rules. The
plug or omnipolar switch must be easily
reached on the installed equipment.
This appliance is not intended to be used
via an external timer or a remote control
system.
The manufacturers decline any responsi-
bility in the event of non-compliance with
what is described above and the accident
prevention norms not being respected
and followed.
To avoid all risk, if the power cable
becomes damaged, it must only be
replaced by the manufacturer, by an
authorised service centre, or by a
qualified electrician.

Publicidad

loading