Publicidad
Idiomas disponibles
Idiomas disponibles
Typical connection (S-VHS VCR and TV) through the S-VIDEO terminal.
mt
SVHS VCR
aS.
See
AF out
vom
AV TERMINAL
(FRONT)
i
Note:
To view a higher quality picture using the S-VIDEO terminal set the TV to the VIDEO (AV) mode using
the TV/VIDEO selector and set the AV-INPUT switch to the S-VIDEO position.
Note:
lf the audio output signal is mono, connect the audio terminal of the SVHS VCR or SVHS Camcarder
to the Audio Input L terminal of the TV set. (Sound will be heard from both speakers of the TV set.)
Note:
lf anly a VCR is to be connected, it is easier to connect this via the 21-pin Euro-SCART terminal. In this
case, when the VCR is put into the play mode, the playback picture will automatically appear on the
TV screen and take priority over the previous mode.
However, this is true only when the A/V-input switch is set to the normal position.
15
Examples of External Speaker Connection
(1) Connecting the Super Woofer
Notes:
1. Sound is: heard from both the TV and
the super woofer.
2. Use a super woofer which has a maxi-
mum permissible input level of greater
than 50 W (MPO).
AV TERMIMAS,
PERIFELEVISION
(2) Connecting External Speakers
Notes:
1. Sound
is heard
only from
the external
speakers.
2., Use external speakers of 4 2 or greater,
3. Use external speakers which have maximum
permissible
input levels of greater
than
50W(MPO).
Right speaker (4 2)
T
a0
O
&Y TERMINAL
'
PEFUTELEVISION:
(3) Connecting both the Super Woofer and
External Speakers.
Notes:
1. Sound is heard from the external speakers
and the Super Woofer.
2, Use external speakers greater than 89 for the
left and right channeis.
3. Use external speakers which have maximum
er
a }
permissible
input
levels
of greater
than
:
:
=
*
-
:
25W(MPO) and use a Super Woofer which
Left speaker (82)
Super Woofer
Right speaker (82)
has a maximum permissible input level of
" (4.9)
greater than 50W(MPO).
Oe
S| @
YS
Publicidad
