Publicidad
Idiomas disponibles
Idiomas disponibles
How to Adjust the Channel Setting
Channel Control Functions
107
pretuned
station
signals
and
cor-
responding real channel numbers
Station | Real channel
Station
{Real channel
signals;
numbers
signals
numbers
E2
M1/S1
Cc01
M2/S2
cca2
M10/S10
CC10
UVvSi1
CCi1
U10/520
CcC20
M1O
CcC42
M7O
CC48
BIO
cc49
B7O
CC5§
S01/S21 &
CH75
T |S02/S22 &
CH76
S03/S23 &
CH77
$24 &
CH78
$25
CH79
@ Available in Italy
© Available in Holland
4 Available in Switzerland
1. Channel Selection Modes
The TV has two channel selection modes:
real channel
selection
and
programme
channel selection.
2. Real Channel Selection
.
As explained in the chart, this TV's frequen-
cy synthesizer tuner has 107 stations in per-
manent
memory.
These
VHF,
UHF
and
CATV channels can be accessed at any time.
3. Programme Channel Selection
There are 99 positions available for preset-
ting the most frequently viewed channels for
instant recall.
4. Channel Displays
The channel you are watching will be indicat-
ed on the screen in the following manner.
Real channel (VHF/UHF)
CH12
CCi2
| |
Pr
1
| |
CH12
Real channe! (CATV)
Programme channel
Note:
The PriCH/CC
bution, —/-- button and 0-9
digit buttons are operated with the remote
control transmitter.
The channel mode that is displayed can be
changed by pressing the Pr/CH/CC button.
Then, the appropriate channel mode (CH ~
CC — Pr) will be displayed on the screen.
Ordinarily, specify the number of digits {one
or two) with the —/-- button when selecting
programme
channels
with the 0-9 digit
buttons.
| Channel preset
|
Up to 99 channels can be preset.
1. Specify the programme channel number
to be preset.
Example: programme channel 1
Pr
1
CH?21
Press the preset button and protect but-
ion at the same time. This will set the TV
to the real channel presetting mode.
i m
Pr 4
CH21
To store a CATV channel in the memory,
press the Pr/CH/CC button and set the
TV to the CATV channel presetting mode.
Pr
1
l CCO2
2. Input areal channel number to be memo-
rized using the 0-9 digit buttons or the
channel selector (A/V) buttons.
(Example: on-air real channel 2)
If inputting it with the channel selector A
or V button, the Auto search will function
and the tuner will automatically seek and
tune into the most adjacent broadcasting
channel.
'i Pr
1
CHO2
3. If fine tuning is required, press the fine
tuning A or V button and protect button.
Channel search stops and the channel
can be fine tuned.
CHO2-—-1—~
4. Press the memory bution and protect but-
ton. This completes memorization.
Pr
1
CHO02
5. Repeat steps 1 through 4 as required for
presetting other channels.
Channel! Ski
The following procedure allows you to skip
over non-preset channels when selecting
channels with the channel selector A or V
button.
1. Specify the programme
channel to be
skipped.
(Example: programme channel 39}
Pr 39
CHO2
"|
Press the preset button and the protect
bution at the same time.
Pr 39
CHO2
ql
2. Press the skip button and protect bution.
Pr 39+
CHO02
3. Press the memory button and protect but-
ton. This completes skip setting.
«Pr 39
CHO02
To preset a skipped channel, perform
steps 1 though 4 of "Channel preset".
1. Disengaging the AFT — Disengag-
ing the AFT (Automatic Fine Tun-
ing) after all channels have been
preset:
Your TV set is equipped with an AFT (Auto-
matic Fine Tuning) feature which automati-
cally performs fine tuning under normal
reception. The feature is, however, ineffec-
tive with weak signals. If the signal on a par-
ticular channel is so weak that the AFT does
not work properly, disengage the AFT and
manually tune-in the station for the best
. result:
1. Select the channel for which you want to
turn the AFT off.
2. While pressing and holding the protect
button, press the fine tuning (A or Vv)
button to disengage the AFT for that
channel. Now use a fine tuning buiton (A
or bh until the best picture quality is ob-
tained.
Note:
Te permanently store the AFT off mode for a
preset channel, first disengage the AFT, then
press the protect button and the memory but-
ton simultaneously. (At this point, the channel
number on the screen changes from green
to yellow, to indicate that the AFT
is dis-
engaged.)
2. Engaging the AFT — Reengaging
the AFT:
Once you select another channel after disen-
gaging the AFT for a particular channel, the
AFT for that channel is activated again.
Note:
To reengage the AFT for the preset channel
on which you stored AFT off mode.
1. Select the channel for which you want to
set the AFT.
2. Repeat
the channel
preset
procedure
again.
(The channel
number
on the
screen will change from yellow back to
green.)
Publicidad
