COMEM 1187 Manual De Instrucciones página 7

Contacts performances
Standard execution (making and breaking capacity)
Voltage (V)
380
220
110
50
Electromagnetic contact (making and breaking capacity)
Voltage (V)
380
220
110
50
Table 2
Operation and maintenance
During the normal operation no ordinary maintenance is
required.
CAUTION
The minimum liquid level needed inside the pocket has to cover
the lenght of 11 cm from the bottom side of the bulb. (Figure 3).
H(Min) = 11cm
Figure 3
AC
28 mA
46 mA
90 mA
170 mA
AC
80 mA
140 mA
275 mA
500 mA
DC
23 mA
40 mA
80 mA
130 mA
DC
70 mA
125 mA
240 mA
380 mA
Storage
The devices can be handled without any tools. Handle the
device with care. The liquid temperature indicators type
1187 must be stored in the original packing and in a dry
place with temperature in the range -10÷40°C (14÷104 °F).
Upon receiving the device, please check:
• The outer surface of the packaging to ensure that it is
intact
• That there are no breakages
If damages are found, please contact COMEM (mail:
customerservice@it.comem.com) and provide the
information from the shipping list and the serial number.
In case of pocket according to DIN standard, the quantity of oil
inside the pocket must be 80ml.
Inductive load
15 mA
22 mA
45 mA
70 mA
Inductive load
45 mA
65 mA
130 mA
200 mA
NOTE
7