Descargar Imprimir esta página

Forum Technologies Wirele-X Manual Del Usuario página 14

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
9.
Troubleshooting
Please review the suggested solutions before calling customer service.
#
Problem
1
The device does not
turn on by pressing
button
2
The device shuts off
while measuring
The device does not
3
show file advance
inside the canal
4
Incorrect
measurements
Possible Cause
1. Malfunction of the
button
2. The battery is depleted
3. Battery is completely flat
4. Electronic malfunction
The battery is depleted
1. Bad electrical contact
2. Electronic malfunction
1. Dry/calcified canal
2. Restoration treatment,
conductive pass is
blocked
3. Blood or irrigation liquid
overflow provides
conductive path outside
the canal
4. Deep caries provides
conductive path outside
the canal
5. Metal crown or metal
filling provide
conductive path outside
the canal
6. Perforation
7. Large lateral canal
- 12 -
Solution
1. Press
button several
times
2. Recharge the battery
3. Contact your customer
service
4. Contact your customer
service
Recharge the battery
1. Perform cable
connection test as
described in section 6.1
2. Contact your customer
service
1. Irrigate the canal
2. Remove old canal filling
to open the path, irrigate
the canal
3. Dry the excessive liquid
4. Block the external
conductive path
5. Avoid contact between
the file and metal
crown/filling
6. Remove the file, close
the perforation and
repeat the measurement,
carefully inserting the file
into canal
7. Try to continue the
measurements (gently
advance the file towards
apex until regular
readings appear)

Publicidad

loading

Productos relacionados para Forum Technologies Wirele-X