Forum Technologies Wirele-X Manual Del Usuario página 19

Wirele-X is intended for use in the electromagnetic environment specified below;
The customer or the user of Wirele-X should assure that it is used in such an environment.
Immunity test
Electrostatic
discharge (ESD)
IEC 61000-4-2
Electrical fast
transients/bursts
IEC 61000-4-4
Surges
IEC 61000-4-5
Voltage dips
Voltage
interruptions
IEC 61000-4-11
Guidance and manufacturer's declaration:
electromagnetic immunity - Wirele-X
IEC 60601-1-2
Test level
±8 kV contact
±15 kV air
±2 kV for power
supply lines
±1 kV for input/output
lines
±1 kV
Line-to-line
±2 kV
Line-to-ground
0% UT; 0,5 cycle
0% UT; 1 cycle
and
70% UT;
25/30 cycles
0% UT;
250/300 cycles
Compliance level
±8 kV contact
±15 kV air
Not Applicable
Not Applicable
Not Applicable
- 17 -
Electromagnetic environment -
guidance
Floors should be wood, concrete
or Ceramic tile. If floors are
covered with synthetic material,
the relative humidity Should be at
least 30%.
Not Applicable
Not Applicable
Not Applicable