auronic AU3165 Manual De Instrucciones página 26

3. INSTRUCTIONS FOR USE
3.1 Installation
Place the product upright on a stable, flat
•
surface.
Make sure the product is at a safe distance of
•
at least 50 cm from a wall or furniture.
The supply voltage must match the value
•
on the rating plate and the outlet must be
grounded.
Check that the water tank is correctly
•
positioned. If the water tank is full or not in
place, the "water tank full" light comes on and
the product stops working.
3.2 How to use
1. Make sure the water tank is empty and properly placed.
2. Connect the product to the power outlet.
3. Press the power button (12) to turn the product on. The product will default to manual
continuous dehumidification with high fan speed. The on/off indicator will light up.
4. Select the desired mode.
5. Press the on/off button (12) to turn the product off. The fan will still work for a few seconds to
blow out the warm air inside the product.
3.3 Automatic switch-off timer
1. Press the timer button (13) to select the
desired number of timer hours from 00 to 24
hours for automatic shutdown.
2. The automatic shutdown can be canceled if
the timer button (13) is pressed twice within
three seconds.
3. The automatic shutdown can also be
canceled if you turn the product off and on
again.
3.4 Manual dehumidification mode
Press the manual dehumidify key (14) to select
the desired humidity level between CO-30%-
35%-40%-45%-50%-55%-60%-65%-70%-75%-
80%. CO means continuous dehumidification
regardless of the ambient humidity.
26