Emptying The Water Tank; Audible Signal - auronic AU3165 Manual De Instrucciones

3.13 Emptying the water tank

Note: When the water tank is full, the warning light on the bottom of the product will flash red.
The product beeps briefly 5 times and automatically turns off. The warning light will continue to
flash until the water tank is replaced.
1. Hold the water tank with two hands. Push against the product with your thumbs and gently
pull out the reservoir (Fig. 1).
2. Remove the cover from the reservoir and empty the reservoir (Fig. 2).
3. Replace the reservoir and press the power button (12) to turn the product back on.

3.14 Audible signal

When the water tank is full of water, the product will stop working and emit a sound signal.
The audible signal will be audible for 20 seconds after you remove the collection tray from the
product.
1.
English
2.
29