auronic AU3165 Manual De Instrucciones página 27

3.5 Fan speed
Press the fan speed button (15) to select the
desired fan speed between low and high. The fan
speed button does not work in defrost mode.
3.6 Child lock
Press the child lock button (15) for 2 seconds to
lock all buttons with a beeping sound.
The child lock function can be set in standby
mode and working mode, but cannot be
activated when the water tank is full.
3.7 Laundry drying function
Press the wash dry button (16) to select the wash
dry function. The product operates in continuous
dehumidification with high fan speed for 6 hours
and then turns off automatically.
3.8 Memory function
When the power cord is unplugged directly or the power is disconnected, and then
reconnected to the power supply, the product will continue to operate in the mode as it was
before it was turned off. The timer setting will be retained.
1. Press the power button (12) to turn off the product, then press the power button to start.
2. Turn the product off and unplug it, then plug it back in and turn the product on. The product
will operate in the factory setting as it was set the first time.
3.9 Low temperature defrost indicator
When the ambient temperature is too low, the
product will go into defrost mode, the product will
operate at high fan speed without dehumidifying.
3.10 Automatic shutdown with water
tank full indicator
The product will switch to standby mode when
the water tank is full or when the water tank is not
installed correctly. After emptying the water tank,
or installing the water tank correctly, the product
will switch to the previous mode.
English
27