Publicidad
Idiomas disponibles
Idiomas disponibles
5. Operation instructions
1. Press the power switch ON and allow the machine to run for 1-2
minutes.
Note: If the machine begins to vibrate excessively, turn the Power Switch to OFF. Unplug the machine and
make sure it's on a level working surface.
2. Press the heating controller switch ON. Allow the machine to heat up
for 4-5 minutes.
3. Empty one spoon of granulated sugar or cotton candy sugar mix into
the floss head. CAUTION: THE FLOSS HEAD SPINS AT ULTRA-FAST
SPEEDS AND IS HOT. DO NOT TOUCH THE FLOSS HEAD. DO NOT
ADD MORE THAN ONE SCOOP OF SUGAR MIX.
4. After approximately 30 seconds, cotton candy will begin to appear in
the pan.
Note: Keep all jewelry and loose clothing away from the spinning floss head.
5. Insert the open end of the cotton candy cone, or candy stick gently into
the cotton candy. Spin the cotton candy onto the cone in a counter-
clockwise direction, twisting the cone as you go. Pull up slowly, while still
rolling the cotton candy onto the cone until the desired portion has been
reached.
6. Continue creating cones until all the sugar has been removed from
pan. There is no need to preheat the machine to start a second batch if
done immediately after the first.
Note: Failure to spin off excess sugar may increase the
likelihood of smoke or burned sugar on next use.
IMPORTANT! Rest the machine 20 minutes after 60 minutes of continuous
use.
7. Turn the machine OFF, unplug and allow cooling completely before
Publicidad
