Publicidad
Idiomas disponibles
Idiomas disponibles
This product will accept
Craftsman
C3 19.2V lithium-ion
battery
packs. For
complete
charging
instructions,
refer to the Operator's
Manual for the battery
packs and chargers.
_,
WARNING:
To prevent accidental
starting
that could cause serious personal
injury, always remove the battery pack from the tool when assembling
parts,
making adjustments,
installing or removing
bit, cleaning, or when it is not in use.
TO ATTACH BATTERY
PACK (Fig, 2)
1.
Lock the trigger switch on the
impact driver by placing the
direction-of-rotation
(forward/
center-lock/reverse)
selector
in the center position.
2.
Align the raised rib on the
battery pack with the groove
inside the impact
driver, and
then insert the battery
pack
into the tool.
Fig. 2
Latch
Battery-
Release
Button
NOTICE:
Make sure that the latch on the battery pack snaps into place and
the battery pack is secured to the tool before beginning operation.
Improper
assembly
of the battery pack can cause damage to internal components.
TO DETACH BATTERY
PACK (Fig. 2)
1.
Lock the trigger switch on the impact driver by placing the direction-of-
rotation (forward/center-locWreverse)
selector
in the center position.
2.
Depress both battery-release
buttons,
located on the sides of the battery
pack, to release the battery pack.
3.
Pull the battery
pack out and remove it from the tool.
,_. WARNING:
Battery tools are always in operating
condition.
Therefore,
the
direction-of-rotation
selector should
always be locked when the tool is not in use
or when carrying
the tool at your side.
11
Publicidad
