Table of Contents
Table of Contents ......................................2
Safety Information ....................................2
Warranty ...................................................2
2-Year Limited Warranty ........................2
Pre-Installation .........................................3
Specifications ........................................3
Tools Required .......................................3
Safety Information
PRECAUTIONS
□
Please read and understand this entire manual
before attempting to assemble, install, or operate
this motion sensor.
□
This motion sensor requires 120-volts AC.
□
Some codes require installation by a qualified
electrician.
□
This motion sensor must be properly grounded.
□
This motion sensor should be installed outdoors to
a wall or eaves
□
This motion sensor should be installed 8 ft. (2.4 m)
above the ground (If the motion sensor is mounted
higher than recommended, aiming the sensor down
will reduce the coverage area.)
□
Do not leave the "ON-TIME" switch in the "TEST"
position. The frequent ON/OFF cycling of the light
fixture will reduce the life of the bulb
Warranty
2-YEAR LIMITED WARRANTY
WHAT IS COVERED
This product is guaranteed to be free of factory defective parts and workmanship for a period of 2 years from date
of purchase. Purchase receipt is required for all warranty claims.
WHAT IS NOT COVERED
This guarantee does not include repair service, adjustment and calibration due to misuse, abuse or negligence.
Any damage to the light fixture resulting from the use of chemicals or a pressure washer machine are not covered
by this warranty. Unauthorized service or modification of the product or of any furnished component will void this
warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time,
loss of use, unauthorized service, or return shipping charges. This warranty is not extended to other equipment
and components that a customer uses in conjunction with this product. The manufacturer reserves the right to
discontinue products and to change specifications at any time without incurring any obligation to incorporate new
features in products previously sold.
No service parts available for this product.
Contact the Customer Service Team at 1-866-308-3976 or visit www.homedepot.com.
Hardware Included .................................4
Package Contents ..................................4
Installation ................................................4
Operation...................................................6
Care and Cleaning ....................................8
Troubleshooting ........................................9
WARNING: Turn the power off at the circuit breaker or
fuse. Place tape over the circuit breaker switch and verify
power is off at the light fixture.
CAUTION: Keep the motion sensor at least 1 in. (25 mm)
away from standard PAR38 bulbs.
CAUTION: Keep the motion sensor at least 2 in. (50 mm)
away from halogen bulbs.
CAUTION: To avoid water damage and the risk of
electrical shock, the motion sensor controls must be facing
the ground when the installation is complete.
NOTICE: Do not connect this motion sensor to a dimmer switch
or timer.
2