Hardware Included; Package Contents; Installation - Defiant 17000069 Guía Para El Uso Y Cuidado

Pre-Installation (continued)

HARDWARE INCLUDED

NOTE: Hardware shown to actual size.
AA
Part
AA

PACKAGE CONTENTS

Installation

1
Determining the mounting
location
□
Determine the mounting location – a wall or
under an eave.
□
If needed, lift the motion sensor (A) up and
rotate it so the controls face the ground after
installation. Tighten the clamp screw when done.
Do not overtighten.
NOTE: If the motion sensor pops out of the ball joint,
loosen the clamp screw, push the motion sensor back
into the ball joint, and tighten the clamp screw. Do not
overtighten.
Description
Wire connector
A
Part Description
A Motion sensor
Quantity
1
Wall Mount
4
Quantity
4
Eave Mount