Publicidad
Loading Film
Always load or unload the film in a shady spot, or
shield the camera from direct sunlight with your
body.
1. Open the camera's back cover by pushing
the back-cover latch in the direction of
the arrow.
2. Insert the film cartridge into the film chamber
by first fitting the flat side on the top of
the rewind shaft.
3. Pull the film leader extending from the cartridge
far enough to reach the take-up spool, and align
the end of the film leader with the film-leader-
end marks. Make sure the film perforations
engage the teeth of the sprocket.
4
.
Close the back cover.
10
Publicidad
