Sylvania LC427SSX Manual Del Usuario página 11

[Audio Output Connection]
Digital (for digital broadcasting only)
If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1 ch digital
broadcasting sound. Use a digital audio coaxial cable to connect the unit to external digital audio devices.
Analog (for both analog and digital broadcasting)
If you connect this unit to an external analog audio device, you can enjoy stereo (2-channel) audio.
Use an RCA audio cable to connect the unit to external analog audio devices.
e.g.)
Dolby Digital
decoder
stereo system
D[GFAL AUDEO
COAXIAL IN
digital audio coaxial cable
RCA audio cable
[PC Connection]
This unit can be connected to your PC that has a DVI terminal. Use an HDMI-DVI conversion cable for this connection
and it requires stereo mini plug-RCA conversion cable as well.
If you connect this unit to your PC, you can use this unit as a PC monitor, rear of this unit
e.g.)
stereo mini plug-RCA
conversion cable
il . ......................
il;;i!ii:i
i ¸:_ ........
C?
7;
Z
ii Z!III
i,;i,!!_i
personal computer
The following signals can be displayed:
VGA 640 x 480 60Hz 1,280 x 768
WXGA
SVGA 800 x 600 60Hz 1,360 x 768
XGA 1,024 x 768 60Hz FHD 1,920 x 1,080
HDMI-DVI conversion cable with ferrite core. HDM[ 1
_ut jack only
60Hz
60Hz
60Hz
Other formats or non-standard signals will not be displayed correctly.
Note:
• Pleasepurchase the HDMI-DVI conversion cable that has a ferrite core.
• The following operations may reduce noise.
-Attach a ferrite core to the AC power cord of your PC.
- Unplug the AC power cord and use the built-in battery of your PC.
EN