Grundig Music 61 Manual Del Usuario página 16

POWER SUPPLY
Mains operation
Note:
Check that the mains voltage on the type plate
7
(on the bottom of the device) corresponds to
your local mains supply.
If this is not the case, contact your specialist
dealer.
1 Insert the supplied power cable into the
»AC ~ « socket on the left of the device.
2 Plug the mains cable into the socket (230 V ~ ,
50/60 Hz).
Caution:
The device is connected to the mains with the
7
power cord. Pull out the power cord when you
want to completely disconnect the device from
the mains.
Unplug the mains plug to disconnect the device
7
from the mains. Make sure the power plug is
easily accessible during operation and not hin-
dered by other objects.
Note:
If there are batteries in the device, these are
7
switched off automatically during mains opera-
tion.
Battery operation
You can also operate the device using standard
batteries (not supplied). In this case, you must dis-
connect the mains power cable.
1
Open the battery compartment by pressing
the area marked »OPEN« and slide aside the
cover.
2 Insert four batteries (4 x1,5V/AM2/LR 14/C-
Size) according to the polarity marked on the
battery compartment.
3
Close the battery compartment.
Notes:
Do not expose the batteries to extreme heat,
7
caused for example by direct sunlight, heaters
or fire.
Remove the batteries when they are flat or
7
when you know that the device will not be used
for a long period of time. When the batteries
are low, a battery symbol appears and flashes
in the display. This function does not work when
16 ENGLISH
____________________________________________________
the power cable is plugged into the device. The
manufacturer accepts no liability for damage
resulting from leaking batteries.
Environmental note:
Batteries, including those which contain no
7
heavy metal, may not be disposed of with
household waste. Please dispose of used bat-
teries in an environmentally sound manner.
Find out about the legal regulations which ap-
ply in your area.
Inserting back-up batteries
During mains operation, the back-up batteries
ensure that stored settings are not lost in the case
of a power failure or when the device is briefly
disconnected from the mains.
1
Open the battery compartment by pressing
the area marked »OPEN« and slide aside the
cover.
2 When inserting the batteries (mignon type
2 x 1,5V/AM 3/LR 06/AA-size) in the small
compartment, observe the polarity marked on
the compartment base.
3 Close the battery compartment.
Note:
If no main batteries are inserted and there is no
7
mains power supply, you have approximately
10 seconds to change the back-up batteries.